Meßgeräte
(GaGe, Kanada)Digital Input / Output, High
Speed Waveform Digitizer,
Arbitrary Waveform Generators
|
 |
CompuScope
14200 200 MS/s, 14 Bit Waveform Digitizer for PCI Bus Gage Applied
expands its on-board memory range on the CS14200 High Speed Digitizer CS14200,
14 bits, 2 Channels, 200MS/s each.
Now available up to 2GS (4Gbytes) on one
single PCI slot! 
|
 |
CompuScope
12400 New 12 bit, 400 MS/s PCI bus digitizer for precision signal
capture - 200 MS/s sampling on 2 synchronous channels
- 400 MS/s on
one channel
- 12 bits nominal resolution
- 200 MHz bandwidth· Full-size,
single-slot PCI card
- Up to 4 Gigabytes of on-board acquisition memory
- Full-featured, software-controlled front-end
- 32 bits, 66 MHz PCI standard
for 200 MB/s transfer to PC memory
|
 | CompuScope
3200
32 Bit, 100 MHz Digital Input Card for PCI Bus
Capture 32 Bits of Digital Data. 100 MHz Clock Rates.
Software Configurable
to provide 8, 16, or 32 Bits.
Up to 2 GB of On-Board Acquisition Memory.
Multi-Card Systems providing wider input words of 64, 96, or 128 Bits. CMOS
or ECL/PECL data inputs.
Software Development Kits for C/C++, MATLAB, LabVIEW
under Windows 95/98/ME and Windows NT/2000/XP.
|
 | CompuGen
3250
32 Bit, 50 MHz Digital Output Card
32 Bit Digital
Output. 50 MHz Clock Rate. Up to 8 Meg x 32 On-Board Pattern Memory. Crystal-Based
Clock Source.
One-Shot, Multi-Shot or Endless Looping of Digital Patterns
Up to 256 Bit Output Using an 8 Card Master/Slave System
Free GageBit
Software Allows Creating and Editing of Digital Patterns. Software Development
Kits for C/C++, MATLAB and LabVIEW.
|
 |
CompuGen
1100 12 Bit, 80 MS/s Analog Output (D/A) Card Traditional waveform
generators provide simple, periodic waveforms appropriate for audio and RF applications.
The complex analog and digital circuits of today require the stimuli to be customized.
CompuGen 1100 enables the user to create a large number of varying analog and
digital outputs and store them for future reference. ISA slot.
|
| |
8/16
channels, 500 kHz DAC/Waveform Generator The V285 is a single-width,
C-size, register-based, VXIbus module that is a 16-bit, precision, arbitrary waveform
generator. It includes a DAC per channel and is cap able of update rates to 500
kHz per channel. Each analog channel includes a 4-pole, Bessel filter with programmable
cutoff frequencies of 10 kHz and 100 kHz. A 16-bit ADC/multiplexer allows all
channels to be automatically tested and calibrated.
|
 |
CompuScope
82G 2 GS/s, 8 Bit Waveform Digitizer for PCI Bus CompuScope 82G
is a single slot, PCI bus card capable of performing 8 bit A/D conversion at sampling
rates up to 2 GS/s in one-channel mode and 1 GS/s in dual channel simultaneous
mode. The CS82G uses two monolithic A/D converters each running at 1 GS/s. In
single-channel mode the two ADCs are clocked in a "ping-pong" mode to achieve
up to 2 GS/s sampling. In dual channel mode, the two ADCs are clocked absolutely
simultaneously to provide coherent sampling.
|
 |
CompuScope
1610 10 MS/s, 16 Bit Waveform Digitizer for PCI Bus A CompuScope
1610 card for PCI bus can simultaneously sample two analog signals at speeds up
to 10 MS/s with 16 bit resolution and store the data in the on-board memory. CompuScope
1610 uses state-of-the-art data conversion technology to provide dual-channel
simultaneous sampling rate of 10 MS/s with 16 bit resolution. Each channel has
its own ADC chip, eliminating the need for multiplexing the inputs which invariably
results in increased noise and lower performance.
|
