with
build-in GSM modem
Telit GM862
  |
GSM modules for Pt1000 (Pt100)
temperature
sensors support.
GPRS/FTP Data Logger.
BieneRemote1281GM-4Pt1000/4A,
- module with 4 Pt1000 (Pt100 optional) temperature inputs (with Smartec
Universal Transducer-Interface UTI). For 4 Pt1000 (Pt100) temperature sensors
connection. Also 4 analog inputs, 6 digital inputs and 5 outputs. Designed to
be used for remote control, monitoring and alarming via GSM (for temperature monitoring,
analog and digital signal monitoring). Data Logger function -analog and digital
data - file transfer to FTP server via GPRS. Board size: 165 x 145
mm.
BieneRemote1281GM-4Pt1000/4A - with or without Power
Supply on board Modules support internal control and module module communication.
Internal control - Output control from input events.
Module-Module communication
via SMS- output control from input events on remoted modules. |
| | BR1281GM-4Pt1000/4A |
| Communication |
via GSM GSM 850/900/1800/1900 |
| Command
and data transmission | SMS/GPRS/FTP |
| Internal GSM modem |
Telit GM862-QUAD |
| SIM
card reader | Yes |
| SIM card type | phase
2 GSM11.14 - SIM 3V |
| Firmware |
Yes |
| Digital
inputs | |
| Number of digital inputs | 6 |
| - Transistor digital input | 6
("0": 0...+1V; "1": +1.5…+12V without external limited resistor) |
| - Events digital inputs |
6 |
| - Digital signal filter
| 25ms - 9 sec |
| Temperature sensor inputs | |
| Number of temperature inputs |
4 |
| Temperature events
inputs | 4 |
| Temperature sensor type |
Temperature sensor Pt1000
(Pt100 optional) |
| Temperature range |
-99 to +149 °C
or -146 to 300°F |
| Events Temperature range |
-99 to +149 °C
or -146 to +300 °F |
| Accuracy | 0.2°C
or 0.4°F |
| Analog inputs |
|
| Number
of analog inputs | 4 |
| 0...+5V / 0...+10V,
0-20mA/4-20mA
100kom typ |
|
- Analog event inputs | 4 |
| ADC resolution | 10
bit |
| Outputs | |
| Number of outputs | 5 |
| - MOSFET transistor outputs | 4
(MOSFET SST5NF20V, 20V max) |
| -
Relay outputs | 1
(NO, NC, COM; 24VDC/1A max 120VAC/0.5A max) |
|
- impuls output | 1 (output 4) |
| Data Logger (optional) | |
| - Time interval | 30
sec ... 300 sec |
| - Logged parameter |
temperature, analog data, digital input and output, status |
| - Output source |
RS232 and FTP |
| Power Supply |
|
| Required Power supply |
External +12 VDC stabilized as optional |
| Power requirement | 800mA(rms)
max, 2A peak during transmission |
| Voltage
regulator | Internal voltage
regulator |
| Power protection |
Reverse-polarity protection |
| Environmental
Conditions | |
| Normal operational temperature range |
-10…+55°C |
| Extreme operational
temperature range (these temperature can affect the sensitivity and performance
of the module) | -20…+70°C |
| Phisical parameter | |
| Board dimension | 100x62mm |
| | BR1281GM-4Pt1000/4A |
| Number of controlled outputs | 5 |
| Number of digital event inputs | |
| Number of readable digital inputs | |
| Number of temperature event inputs | 4 |
| Number of analog event inputs | 4 |
| Number of readable analog data | 4 |
| Authorization cell phone numbers | 7 |
| Events cell phone numbers | 4
(external cell phone) +3 (external BieneRemote module) |
| SMS
events format | Text message |
| SMS digital data format | Binary |
| SMS message format for analog data | In
% from Reference level 00 - 99 |
| Metric system
temperature | °C
or °F |
| SMS message format for temperature
data | min level 2,
min level 1, max level 1, max level 2 measurement
-99°C - +149°C
-146 to 300°F
events level
-99°C - +149°C
-146°F
- +300°F |
