info@bieneelectronics.com
Home
Electronic Design
Specification
Products
Remote Control
BieneRemote16GM
BieneRemote128GM
BieneRemote-Gate
Applications
Examples
Demo
Accessories
Measure. Equipment
Order
Contact
About us
Distributors
Feedback
 

Acquitek

GaGe

IOtech

ETC

MēraparatūraDEENENLVRU

New module BRM128GM for new projects; for electronic and software designer. Can connect WEB camera. Based on Telit GM862-QUAD or GM862-GPS and microcontroller ATmega128.
GPRS-FTP Data-Logger BRM128GM-GPS-PHOTO support GPS and WEB camera. Camera resolution 640x480, Color. Software and hardware we can modify with your requirements.
Base board for analog, digital, temperature sensor connection. Support SHT11 temperature and humidity sensor.
Go

Mēraparatūra (ETC, Slovakija)

Measuring devices, Digital Storage Oscilloscope, Logic Analyzer, Waveform Generator

LAB IIETC Measuring LAB II
The EMLII (ETC Measuring Lab II) is a second generation of measuring devices from ETC company. The devices in this family features great price/performance ratio. All devices of this family are CE certified.
The EMLII contains:
M621 - 150MHz Digital Storage Oscilloscope
M611 - Logic Analyzer
M631 - Aribtrary Waveform Generator



M621M621 150MHz Digital Storage Oscilloscope
Occupies one 5¼" floppy disk drive slot or external version.
Two channels, 150 MHz Bandwidth
50 MS/s real time and 5 GS/s repetitive
10 mV/div to 5V/div in Nine Vertical Voltage Range
150 MHz spectrum analyzer with FFT using
ETC Scope software for Windows 3.x, 95, 98, ME, NT, 2000 & Linux included
ETC M621 Development Kit optionally available



M611M611 Logic Analyzer
The ETC M611 Logic analyzer is a package, which will together with PC create 32 channel logic analyzer with sampling rate up to 100MHz. Maximum length of record is 524280 of 32-bit words.
32 channel logic analyzer
Sampling rate up to 100MHz
Length of record 524280 of 32-bit words.
Software for measuring and later data analysis
Connected to PC via parallel port (EPP) or USB



M631M631 Arbitrary Waveform Generator
The Arbitrary Waveform Generator ETC M631 is a hardware and software package that turns your PC to a dual channel generator featuring a generation of analog signals and also digital events defined maximally by 262 144 points.
Internal or external version
Two channels update rate up to 50MS/s
Level from 160mVpp to 16Vpp
Shift from -4V to +4V
Powerful waveform editors
Import from ASCII (for example Matlab)
Possibility to generate 16-bit digital words



M520

The M520 Oscilloscope Series belongs to the ETC Measuring Lab 3 (EML3) line and offers a wide range of devices. It provides a customer with a possibility to select a device perfectly fitting his or her needs offering the best performance/cost ratio. All devices of the M520 Oscilloscope Series offer extremely simple and intuitive installation and operation, can adapt to any screen resolution (from 800 x 600 pixels upwards). They are powered directly from the USB interface.

  • Frequency response of vertical amplifiers 60/150MHz
  • Max. realtime sampling frequency 50/200MS/s
  • Max. equivalent sampling frequency 5/ 20GS/s
  • Size of storage for each channel 4/8K



M221M221 100MHz Digital Storage Oscilloscope
ETC M221 is a package that turns your PC compatible computer into a dual channel (four-channel) digital storage oscilloscope with the 100 MHz bandwidth. The oscilloscope uses the 16-bit ISA bus add-on card EM221 for data acquisition and the Scope software for processing. Together it creates a very user-friendly environment, where all controls are easy-to-access either by mouse or other pointing device. A user, who is used to operate a standard oscilloscope, will master the M221 in a very short period of time.



M321M321 Arbitrary Waveform Generator
ETC M321 is a package that turns your PC compatible computer into a 2-channel arbitrary generator. This device consists of the EM321 ISA bus add-on card and a software, using which you can easily control the device. All generator functions are easy-to-control by mouse. Besides standard waveform types (sine wave, saw, triangle, rectangle), that are already implemented and ready to use, it is possible to define or create desired waveform by using the built-in powerful waveform editor by either entering a mathematical expression or simply drawing a waveform by mouse. You can set a waveform shape and amplitude independently for each channel.



M1221M1221 Mixed Signals Oscilloscope
M1221 MSO (Mixed Signals Oscilloscope) offers the performance of two different measuring devices: a dual channel digital storage oscilloscope and a 16 channel logic analyzer. It has integrated cross triggering and system clocking. The package also contains all necessary clips and wires as well as very user-friendly and easy-to-use software which will let you to control this device from the screen as comfortably as you would expect from common stand alone devices. Additionally, it has unique capability of a fully synchronized logic analyzer and oscilloscope cooperating together as a single device.



Lai pasûtīt, rakstiet mums




Home | Feedback | Contact





Hosted by iPowerWeb
iPowerWeb

Latvijas Reitingi